- 0184Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof
- 028483Transmission shafts (including camshafts and crankshafts) and cranks; bearing housings, housed bearings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints); parts thereof:
- 03848310Transmission shafts (including camshafts and crankshafts) and cranks:
US HTS code
8483105000
Other transmission shafts and cranks
Rates updated· Source: USITC Harmonized Tariff Schedule export
Column 2 rate (Cuba, North Korea): 30%
Estimate duty
This code's duty rate (Free) isn't a simple percentage, so it can't be estimated here — check the official source for the exact calculation.
Section 232/301 & notes
- See 9903.90.08.
Matching UK commodity codes
Sharing the 6-digit HS root 848310.
8483102110For use in civil aircraft8483102190Other8483102510For use in civil aircraft8483102590Other8483102910For use in civil aircraft8483102990Other8483105010For use in civil aircraft8483105090Other8483109510For use in civil aircraft8483109530Steel alloy splined shaft (torque shaft) with straight teeth and involute profile, with: -external toothing in a diametral pitch standard, -17 teeth or more, but not more than 50 teeth, -a diameter of 35 mm or more, but not more than 145 mm, -a length of 200 mm or more, but not more than 1345 mm, -a hardness of 35 HRC or more, but not more than 45 HRC8483109540Stepped shaft made of carbon steel with: -rolled, involute profiled, splined shaft end, the helix angle of which is at least 0°15,5' but not more than 0° 21,5', -a largest diameter of 16 mm or more, but not more than 18 mm, -a length of 137 mm or more, but not more than 155 mm, -a weight of 0,12 kg or more, but not more than 0,28 kg8483109550Drum shaft for torque transmission, in steel (to SM45C for shaft standard and STS430 for ring standard) with: -a length of 137,8 mm or more but not more than 138,2 mm, -an outer diameter of 23 mm or more but not more than 48,025 mm, -a weight of 1,0245 kg or more but not more than 1,0445 kg, -a hardness of the shaft of 40 or more on the Rockwell C hardness scale (HRC), but not more than 50 HRC, -a ring hardness of 90 or more on the Rockwell B hardness scale (HRB), but not more than 120 HRB, -an external 37-teeth spline with major diameter of 41 mm or more but not more than 48 mm