- 0174Copper and articles thereof
- 02741021Of refined copper:
US HTS code
7410216000
Other
Rates updated· Source: USITC Harmonized Tariff Schedule export
Preferential programs: Free under A, AU, BH, CL, CO, D, E, IL, JO, JP, KR, MA, OM, P, PA, PE, S, SG
Column 2 rate (Cuba, North Korea): 6%
Estimate duty
This is an estimate based on published rates, not customs advice. Final assessment is made by customs.
Section 232/301 & notes
No Section 232/301 overlay or footnote noted for this code in the HTS export.
Matching UK commodity codes
Sharing the 6-digit HS root 741021.
7410210010Sheet or plate of polytetrafluoroethylene, containing aluminium oxide or titanium dioxide as filler or reinforced with glass-fibre fabric, covered on both sides with copper foil7410210020Foils, rolls composed of one layer of glass epoxy of 100 µm colaminated with refined copper foil on one or two sides of 35 µm with a tolerance of 10 % for use in the production of smart cards7410210030Film of polyimide, whether or not containing epoxide resin and/or glass fibre, covered on one side or on both sides with a copper foil7410210040Sheet or plates: - consisting of at least a central layer of paper or one central sheet of any type of nonwoven fibre, laminated on each side with glass-fibre fabric and impregnated with epoxide resin, or - consisting of multiple layers of paper, impregnated with phenolic resin, coated on one or both sides with a copper film with a maximum thickness of 0,15 mm7410210050Plates: -consisting of at least one layer of fibreglass fabric impregnated with thermosetting resin, -covered on one or both sides with copper foil with a thickness of not more than 0,15 mm, and -with a dielectric constant (DK) of less than 3,9 and a loss factor (Df) of less than 0,015 at a measuring frequency of 10 GHz, as measured according to IPC-TM-6507410210055Plates: - consisting of at least one layer of fibreglass fabric impregnated with epoxide resin, - covered on one or both sides with copper foil with a thickness of not more than 0,15 mm, - with a dielectric constant (DK) of less than 5,4 at 1 MHz, as measured according to IPC-TM-650 2.5.5.2, - with a loss tangent of less than 0,035 at 1 MHz, as measured according to IPC-TM-650 2.5.5.2, - with a comparative tracking index (CTI) of 600 or more7410210065Sheets or Plates -consisting of at least one layer of fiberglass fabric impregnated with modified epoxy resin, without the use of halogenated flame retardants, -covered on one or both sides with copper foil with a thickness of 0,15 mm or less, -and with a TG of 145°C or more but not more than 280°C according to TMA, in agreement with IPC-4101/128 or 4101/130 or IPC-4101/153 or 4101/1547410210090Other
Related codes
Other codes at this level
74102130Copper clad laminates