HS chapter
76
Aluminium and articles thereof
194 UK codes·124 US codes· 16 headings
7601Unwrought aluminium
UK commodity codes (5)
US HTS codes (13)
- 7601103000Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils
- 7601106040Of 99.9 percent aluminum or greater
- 7601106045Of greater than 99.8 percent but less than 99.9 percent
- 7601203000Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils
- 7601206000Containing 25 percent or more by weight of silicon
- 7601209030Aluminum vanadium master alloy
- +7 more US codes in this heading
7602Aluminium waste and scrap
UK commodity codes (3)
7603Aluminium powders and flakes
7604Aluminium bars, rods and profiles
UK commodity codes (13)
- 7604101011Unassembled, containing not more than 99.3% of aluminium
- 7604109011Unassembled, containing not more than 99.3% of aluminium
- 7604109025Unassembled, containing not more than 99.3% of aluminium
- 7604109080Unassembled, containing not more than 99.3% of aluminium
- 7604210000Hollow profiles
- 7604291000Bars and rods
- +7 more UK codes in this heading
US HTS codes (13)
- 7604101000Profiles
- 7604103000Having a round cross section
- 7604210010Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapter
- 7604291010Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapter
- 7604293030High-strength heat-treatable alloys of a kind described in statistical note 6 to this chapter
- 7604293060Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapter
- +7 more US codes in this heading
7605Aluminium wire
UK commodity codes (6)
- 7605110000Of which the maximum cross-sectional dimension exceeds 7 mm
- 7605190010Not alloyed aluminium wire, of a diameter of 2 mm or more but not more than 6 mm, covered with a layer of copper of a thickness of 0,032 mm or more but not more than 0,117 mm
- 7605210010Aluminium alloy wire with a diameter of 9,50 mm or more but not more than 19,15 mm, in coils, for use in the manufacture of aeronautical fasteners
- 7605190090Other
- 7605210090Other
- 7605290000Other
7606Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm
UK commodity codes (61)
- 7606113000Aluminium Composite Panel
- 7606115025Not backed, without internal layers of other material
- 7606115086Not backed, without internal layers of other material
- 7606119125Not backed, without internal layers of other material
- 7606119186Not backed, without internal layers of other material
- 7606119325Not backed, without internal layers of other material
- +55 more UK codes in this heading
US HTS codes (19)
- 7606113030With a thickness of more than 6.3 mm
- 7606113060With a thickness of 6.3 mm or less
- 7606116000Clad
- 7606123015High-strength heat-treatable alloys of a kind described in statistical note 6 to this chapter
- 7606123025Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapter
- 7606123045Body stock
- +13 more US codes in this heading
7607Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm
UK commodity codes (48)
- 7607111111Consigned from Thailand
- 7607111910For household use, of a thickness of not less than 0,008 mm and not more than 0,018 mm, in rolls of a width not exceeding 650 mm
- 7607111930For household use, of a thickness of not less than 0,007 mm and less than 0,008 mm, whether or not annealed
- 7607111940For household use, of a thickness of not less than 0,008 mm and not more than 0,018 mm, in rolls of a width exceeding 650 mm, whether or not annealed
- 7607111950For household use, of a thickness of more than 0,018 mm and less than 0,021 mm, whether or not annealed
- 7607111960For other uses than household aluminium foil, - Of a thickness of not less than 0,007 mm and less than 0,008 mm, whether or not annealed, or, - Of a thickness of not less than 0,008 mm and not more than 0,018 mm, in rolls of a width exceeding 650 mm, whether or not annealed, or, - Of a thickness of more than 0,018 mm and less than 0,021 mm, whether or not annealed
- +42 more UK codes in this heading
7608Aluminium tubes and pipes
UK commodity codes (13)
- 7608100011Unassembled, not welded, containing not more than 99.3% of aluminium
- 7608100020Tubes and pipes, ready for fitting, usable as hydraulic conduits or as conduits for fuel-oil or lubricants for use in certain types of aircraft
- 7608100080Unassembled, not welded, containing not more than 99.3% of aluminium
- 7608202010With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft
- 7608202020Tubes and pipes, ready for fitting, usable as hydraulic conduits or as conduits for fuel-oil or lubricants for use in certain types of aircraft
- 7608208110With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft
- +7 more UK codes in this heading
7609Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves)
UK commodity codes (6)
- 7609000010For use in certain types of aircraft
- 7609000030Aluminium connecting block for automotive air conditioning systems: -with a T6 hardening, -equipped with round stubs with a circumferential outer groove, -with through or non-through holes, made of profiles with an upper radius of 8 mm or more but not more than 11 mm, and a lower radius of 12 mm or more but not more than 17 mm, -with a distance between holes of 15 mm or more but not more than 22 mm, -with sockets designed for brazing or clamping, -with mounting holes for M6 or M8 mounting screw, threaded or not, -with a width of 5 mm or more but not more than 16 mm, -for connecting a compressor, a condenser, an evaporator, a chiller and other lines
- 7609000040Flame brazed aluminium block for connecting tubes in automotive heat exchangers and/or turbocharged air coolers and/or automatic transmission coolers: -with extruded, bent connection tubes with an outer diameter of 5 mm or more, but not more than 25 mm, -with a weight of 0,02 kg or more, but not more than 0,25 kg, for use in the manufacture of cooling system in vehicles of Chapter 87
- 7609000050Machined aluminium components: -containing by weight 0,55 %, or more but not more than 0,61 % of magnesium, -containing by weight 0,55 %, or more but not more than 0,61 % of silicon, -with a hardening state of T5 or T6, -with a mass of 0,05 kg or more, but not more than 0,2 kg, for use in the manufacture of CO₂ cooling systems in motor vehicles
- 7609000060Aluminium connection block: -with a weight of 3 g or more but not more than 400 g, -manufactured from 6061-T6 or 6060-T6 or 6082-T6 aluminium grade, -being an integral part of an air conditioning hose assembly or oil cooling line hose assembly or air brake line hose assembly or water cooling line hose assembly, -with holes (sockets) or splines (pilots) or threads that allow installation in an automotive or other air conditioning system (also understood as installation in the line), -with sockets designed for brazing or fastening, -with at least 1 through-hole with a diameter of 3 mm or more but not more than 25 mm, for the manufacture of automotive cooling and air conditioning systems
- 7609000090Other
7610Aluminium structures (excluding prefabricated buildings of heading 9406) and parts of structures (for example, bridges and bridge-sections, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, balustrades, pillars and columns); aluminium plates, rods, profiles, tubes and the like, prepared for use in structures
UK commodity codes (6)
- 7610100000Doors, windows and their frames and thresholds for doors
- 7610901000Bridges and bridge-sections, towers and lattice masts
- 7610909010Bars, rods, profiles (whether or not hollow), tubes, pipes, unassembled, not welded, made from aluminium, whether or not alloyed, containing not more than 99.3% of aluminium
- 7610909091Products attached (e.g. by welding or fasteners) to form subassemblies
- 7610909092Products in a packaged kit with the necessary parts to assemble a finished product without further finishing or fabrication of the parts (‘finished goods kit’)
- 7610909095Other
7611Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment
US HTS codes (2)
7612Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment
UK commodity codes (4)
7613Aluminium containers for compressed or liquefied gas
7614Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated
UK commodity codes (2)
US HTS codes (6)
- 7614101000Not fitted with fittings and not made up into articles
- 7614105000Fitted with fittings or made up into articles
- 7614902030With a cross-sectional area less than 240 mm²
- 7614902060With a cross-sectional area greater than or equal to 240 mm²
- 7614905000Fitted with fittings or made up into articles
- 7614904000Other
7615Table, kitchen or other household articles and parts thereof, of aluminium; pot scourers and scouring or polishing pads, gloves and the like, of aluminium; sanitary ware and parts thereof, of aluminium
UK commodity codes (6)
- 7615101010Aluminium radiators and elements or sections of which such radiator is composed, whether or not such elements are assembled in blocks
- 7615103000Manufactured from foil of a thickness not exceeding 0,2 mm
- 7615108010Aluminium radiators and elements or sections of which such radiator is composed, whether or not such elements are assembled in blocks
- 7615200000Sanitary ware and parts thereof
- 7615101090Other
- 7615108090Other
US HTS codes (13)
- 7615101100Pot scourers and scouring or polishing pads, gloves and the like
- 7615102015Bakeware (cookware not suitable for stove top use)
- 7615103015Bakeware (cookware not suitable for stove top use)
- 7615105020Bakeware (cookware not suitable for stove top use)
- 7615107125Containers suitable for food preparation, baking, reheating or storage, 0.04 mm or more but not over 0.22 mm in thickness
- 7615107130Bakeware (cookware not suitable for stove top use)
- +7 more US codes in this heading
7616Other articles of aluminium
UK commodity codes (16)
- 7616100010Self-locking bolts and nuts (of the type "Hi-lok")
- 7616100091For use in certain types of aircraft
- 7616910000Cloth, grill, netting and fencing, of aluminium wire
- 7616991010Collars, flanges and other devices for fixing, jointing, clamping or spacing, for use in certain types of aircraft
- 7616991020"Quick change" apparatus for transforming passenger transport aeroplanes into goods transport aeroplanes and vice versa, for use in certain types of aircraft
- 7616991091Aluminium radiators and elements or sections of which such radiator is composed, whether or not such elements are assembled in blocks
- +10 more UK codes in this heading
US HTS codes (17)