HS chapter
72
Iron and steel
590 UK codes·559 US codes· 29 headings
7201Pig iron and spiegeleisen in pigs, blocks or other primary forms
UK commodity codes (9)
- 7201101110Pig iron ingots with a length of not more than 350 mm, a width of not more than 150 mm, a height of not more than 150 mm
- 7201101900Containing by weight more than 1 % of silicon
- 7201103010Pig iron ingots with a length of not more than 350 mm, a width of not more than 150 mm, a height of not more than 150 mm, containing by weight not more than 1 % of silicon
- 7201109000Containing by weight less than 0,1 % of manganese
- 7201200000Non-alloy pig iron containing by weight more than 0,5 % of phosphorus
- 7201501000Alloy pig iron containing by weight not less than 0,3 % but not more than 1 % of titanium and not less than 0,5 % but not more than 1 % of vanadium
- +3 more UK codes in this heading
7202Ferro-alloys
UK commodity codes (26)
- 7202112000With a granulometry not exceeding 5 mm and a manganese content by weight exceeding 65 %
- 7202210000Containing by weight more than 55 % of silicon
- 7202291000Containing by weight 4 % or more but not more than 10 % of magnesium
- 7202300000Ferro-silico-manganese
- 7202411000Containing by weight more than 4 % but not more than 6 % of carbon
- 7202419000Containing by weight more than 6 % of carbon
- +20 more UK codes in this heading
US HTS codes (28)
- 7202111000Containing by weight more than 2 percent but not more than 4 percent of carbon
- 7202115000Containing by weight more than 4 percent of carbon
- 7202191000Containing by weight not more than 1 percent of carbon
- 7202195000Containing by weight more than 1 percent but not more than 2 percent of carbon
- 7202211000Containing by weight more than 3 percent of calcium
- 7202217500Containing by weight more than 80 percent but not more than 90 percent of silicon
- +22 more US codes in this heading
7203Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99,94 %, in lumps, pellets or similar forms
7204Ferrous waste and scrap; remelting scrap ingots of iron or steel
UK commodity codes (22)
- 7204100000Waste and scrap of cast iron
- 7204211010Scrap
- 7204219010Scrap
- 7204290010Scrap
- 7204300010Scrap
- 7204411010Scrap
- +16 more UK codes in this heading
7205Granules and powders, of pig iron, spiegeleisen, iron or steel
UK commodity codes (3)
US HTS codes (3)
7206Iron and non-alloy steel in ingots or other primary forms (excluding iron of heading 7203)
UK commodity codes (2)
US HTS codes (2)
7207Semi-finished products of iron or non-alloy steel
UK commodity codes (20)
US HTS codes (9)
- 7207110000Of rectangular (including square) cross section, the width measuring less than twice the thickness
- 7207120010Having a width measuring less than four times the thickness
- 7207120050Having a width measuring at least four times the thickness
- 7207190030Of circular cross section
- 7207200025Having a width measuring less than four times the thickness
- 7207200045Having a width measuring at least four times the thickness
- +3 more US codes in this heading
7208Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated
UK commodity codes (31)
- 7208100000In coils, not further worked than hot-rolled, with patterns in relief
- 7208250000Of a thickness of 4,75 mm or more
- 7208260000Of a thickness of 3 mm or more but less than 4,75 mm
- 7208270000Of a thickness of less than 3 mm
- 7208360000Of a thickness exceeding 10 mm
- 7208370010Intended for re-rolling
- +25 more UK codes in this heading
US HTS codes (32)
7209Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated
UK commodity codes (21)
US HTS codes (22)
- 7209150000Of a thickness of 3 mm or more
- 7209160040“Advanced” or “ultra” of a kind described in statistical note 4 to this chapter
- 7209160070Annealed
- 7209170040“Advanced” or “ultra” of a kind described in statistical note 4 to this chapter
- 7209170070Annealed
- 7209181530Annealed
- +16 more US codes in this heading
7210Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated
UK commodity codes (49)
- 7210110010Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)
- 7210122010Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)
- 7210128010Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)
- 7210200010Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)
- 7210300010Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)
- 7210410020Aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips
- +43 more UK codes in this heading
US HTS codes (21)
- 7210110000Of a thickness of 0.5 mm or more
- 7210120000Of a thickness of less than 0.5 mm
- 7210200000Plated or coated with lead, including terne-plate
- 7210300030Of high-strength steel
- 7210410000Corrugated
- 7210490040“Advanced” or “ultra” of a kind described in statistical note 4 to this chapter
- +15 more US codes in this heading
7211Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated
UK commodity codes (27)
- 7211130011Of a width not exceeding 350 mm and of a thickness of 50 mm or more
- 7211140010Of a width exceeding 500 mm
- 7211140091Of a width not exceeding 350 mm and of a thickness of 50 mm or more
- 7211190010Of a width exceeding 500 mm
- 7211190091Of a width not exceeding 350 mm and of a thickness of 50 mm or more
- 7211232010Of a width exceeding 500 mm
- +21 more UK codes in this heading
US HTS codes (25)
7212Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated
UK commodity codes (56)
- 7212101000Tinplate, not further worked than surface-treated
- 7212109011Not further worked than surface-treated
- 7212109090Of a width not exceeding 500 mm
- 7212200011Not further worked than surface-treated
- 7212200090Of a width not exceeding 500 mm
- 7212300020Aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips
- +50 more UK codes in this heading
7213Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel
UK commodity codes (10)
- 7213100000Containing indentations, ribs, grooves or other deformations produced during the rolling process
- 7213200000Other, of free-cutting steel
- 7213911000Of a type used for concrete reinforcement
- 7213912000Of a type used for tyre cord
- 7213914100Containing by weight 0,06 % or less of carbon
- 7213914900Containing by weight more than 0,06 % but less than 0,25 % of carbon
- +4 more UK codes in this heading
US HTS codes (12)
- 7213100000Concrete reinforcing bars and rods
- 7213200010Containing by weight 0.1 percent or more of lead
- 7213913011Tire cord-quality steel wire rod of a kind described in statistical note 5 to this chapter
- 7213913015Of Cold Heading Quality (CHQ) steel of a kind described in statistical note 6 to this chapter
- 7213913020Of welding quality wire rods of a kind described in statistical note 7 to this chapter
- 7213914500Containing by weight 0.6 percent or more of carbon
- +6 more US codes in this heading
7214Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling
UK commodity codes (20)
- 7214100010Concrete reinforcement bars and rods, containing indentations, ribs, grooves or other deformations produced during the rolling process; excluding high fatigue performance concrete reinforcement bars and rods, and excluding other long products, such as round bars
- 7214200010High fatigue performance concrete reinforcing bars and rods
- 7214200020Concrete reinforcement bars and rods excluding long products, such as round bars
- 7214300010Concrete reinforcement bars and rods, containing indentations, ribs, grooves or other deformations produced during the rolling process; excluding high fatigue performance concrete reinforcement bars and rods, and excluding other long products, such as round bars
- 7214911010Concrete reinforcement bars and rods, containing indentations, ribs, grooves or other deformations produced during the rolling process; excluding high fatigue performance concrete reinforcement bars and rods, and excluding other long products, such as round bars
- 7214919010Concrete reinforcement bars and rods, containing indentations, ribs, grooves or other deformations produced during the rolling process; excluding high fatigue performance concrete reinforcement bars and rods, and excluding other long products, such as round bars
- +14 more UK codes in this heading
US HTS codes (18)
- 7214100000Forged
- 7214200000Concrete reinforcing bars and rods
- 7214300010Containing by weight 0.1 percent or more of lead
- 7214910016With a maximum cross section less than 152 mm
- 7214910020With a maximum cross section of 152 mm or more
- 7214910060Containing by weight 0.25 percent or more but less than 0.6 percent of carbon
- +12 more US codes in this heading
7215Other bars and rods of iron or non-alloy steel
UK commodity codes (6)
- 7215100000Of free-cutting steel, not further worked than cold-formed or cold-finished
- 7215501100Of rectangular (other than square) cross-section
- 7215508000Containing by weight 0,25 % or more of carbon
- 7215900010Hot-rolled, hot-drawn or extruded, not further worked than clad
- 7215501900Other
- 7215900090Other
US HTS codes (12)
- 7215100010Containing by weight 0.1 percent or more of lead
- 7215500016With a diameter or cross section measuring less than 76 mm
- 7215500018With a diameter or cross section measuring 76 mm or more but not exceeding 228 mm
- 7215500020With a diameter or cross section exceeding 228 mm
- 7215500061With a diameter or cross section measuring less than 76 mm
- 7215500063With a diameter or cross section measuring 76 mm or more but not exceeding 228 mm
- +6 more US codes in this heading
7216Angles, shapes and sections of iron or non-alloy steel
UK commodity codes (24)
- 7216100000U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm
- 7216210000L sections
- 7216220000T sections
- 7216311000Of a height of 80 mm or more but not exceeding 220 mm
- 7216319000Of a height exceeding 220 mm
- 7216321100With parallel flange faces
- +18 more UK codes in this heading
7217Wire of iron or non-alloy steel
UK commodity codes (18)
- 7217101000With a maximum cross-sectional dimension of less than 0,8 mm
- 7217103100Containing indentations, ribs, grooves or other deformations produced during the rolling process
- 7217105000Containing by weight 0,25 % or more but less than 0,6 % of carbon
- 7217109010Of non-alloy steel, with a maximum cross-sectional dimension exceeding 3 mm
- 7217201000With a maximum cross-sectional dimension of less than 0,8 mm
- 7217203000With a maximum cross-sectional dimension of 0,8 mm or more
- +12 more UK codes in this heading
US HTS codes (48)
7218Stainless steel in ingots or other primary forms; semi-finished products of stainless steel
UK commodity codes (7)
US HTS codes (9)
- 7218100000Ingots and other primary forms
- 7218910015Having a cross-sectional area of less than 232 cm2
- 7218910030Having a cross-sectional area of 232 cm2 or more
- 7218910060Having a width at least four times the thickness
- 7218990015Having a cross-sectional area of less than 232 cm2
- 7218990030Having a cross-sectional area of 232 cm2 or more
- +3 more US codes in this heading
7219Flat-rolled products of stainless steel, of a width of 600 mm or more
UK commodity codes (57)
7220Flat-rolled products of stainless steel, of a width of less than 600 mm
UK commodity codes (28)
US HTS codes (24)
- 7220110000Of a thickness of 4.75 mm or more
- 7220121000Of a width of 300 mm or more
- 7220125000Of a width of less than 300 mm
- 7220201010Containing more than 1.5 percent but less than 5 percent by weight of molybdenum
- 7220201060Containing less than 15 percent by weight of chromium
- 7220206005Of high-nickel alloy steel
- +18 more US codes in this heading
7221Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel
UK commodity codes (2)
US HTS codes (6)
7222Other bars and rods of stainless steel; angles, shapes and sections of stainless steel
UK commodity codes (22)
US HTS codes (31)
- 7222110001Electroslag or vacuum arc remelted
- 7222110006Of high-nickel alloy steel
- 7222110057Containing less than 8 percent by weight of nickel
- 7222110059Containing 8 percent or more but less than 24 percent by weight of nickel
- 7222110082Containing less than 8 percent by weight of nickel
- 7222110084Containing 8 percent or more but less than 24 percent by weight of nickel
- +25 more US codes in this heading
7223Wire of stainless steel
UK commodity codes (4)
US HTS codes (8)
- 7223001005Spring round wire of a kind described in statistical note 8 to this chapter
- 7223001016With a diameter of less than 0.25 mm
- 7223001031With a diameter of 0.25 mm or more but less than 0.76 mm
- 7223001046With a diameter of 0.76 mm or more but less than 1.52 mm
- 7223001061With a diameter of 1.52 mm or more but less than 5.1 mm
- 7223001076With a diameter of 5.1 mm or more
- +2 more US codes in this heading
7224Other alloy steel in ingots or other primary forms; semi-finished products of other alloy steel
UK commodity codes (13)
- 7224101000Of tool steel
- 7224900229Of rectangular (including square) cross-section
- 7224900289Hot-rolled or obtained by continuous casting
- 7224900300Of high-speed steel
- 7224900500Containing by weight not more than 0,7 % of carbon, 0,5 % or more but not more than 1,2 % of manganese and 0,6 % or more but not more than 2,3 % of silicon; containing by weight 0,0008 % or more of boron with any other element less than the minimum content referred to in note 1(f) to this chapter
- 7224901800Forged
- +7 more UK codes in this heading
US HTS codes (11)
- 7224100005Of high-nickel alloy steel
- 7224100045Of tool steel
- 7224900005Of high-nickel alloy steel
- 7224900015Having a width less than four times the thickness
- 7224900025Having a width at least four times the thickness
- 7224900045Having a width less than four times the thickness
- +5 more US codes in this heading
7225Flat-rolled products of other alloy steel, of a width of 600 mm or more
UK commodity codes (38)
- 7225110011With a maximum core loss not higher than 0.9 W/kg
- 7225110015With a maximum core loss higher than 0.9 W/kg but not higher than 1,05 W/kg
- 7225110019With a maximum core loss higher than 1,05 W/kg
- 7225191010Products clad, plated or coated, not in coils, without patterns in relief, of a thickness exceeding 10 mm and products clad, plated or coated, not in coils, without patterns in relief, of a thickness of 4,75 mm or more but not exceeding 10 mm and of a width of 2 050 mm or more
- 7225199000Cold-rolled
- 7225301000Of tool steel
- +32 more UK codes in this heading
US HTS codes (28)
7226Flat-rolled products of other alloy steel, of a width of less than 600 mm
UK commodity codes (32)
- 7226110012With a maximum core loss not higher than 0.9 W/kg
- 7226110014With a maximum core loss higher than 0.9 W/kg but not higher than 1,05 W/kg
- 7226110016With a maximum core loss higher than 1,05 W/kg
- 7226110092With a maximum core loss not higher than 0.9 W/kg
- 7226110094With a maximum core loss higher than 0.9 W/kg but not higher than 1,05 W/kg
- 7226110096With a maximum core loss higher than 1,05 W/kg
- +26 more UK codes in this heading
7227Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel
UK commodity codes (5)
- 7227100000Of high-speed steel
- 7227200000Of silico-manganese steel
- 7227901000Containing by weight 0,0008 % or more of boron with any other element less than the minimum content referred to in note 1(f) to this chapter
- 7227905000Containing by weight 0,9 % or more but not more than 1,15 % of carbon, 0,5 % or more but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum
- 7227909500Other
US HTS codes (14)
- 7227100000Of high-speed steel
- 7227200030Of welding quality wire rods of a kind described in statistical note 7 to this chapter
- 7227901030Of ball-bearing steel
- 7227902030Of ball-bearing steel
- 7227906005Of high-nickel alloy steel
- 7227906010Of Cold Heading Quality (CHQ) steel of a kind described in statistical note 6 to this chapter
- +8 more US codes in this heading
7228Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel
UK commodity codes (31)
- 7228102000Not further worked than hot-rolled, hot-drawn or extruded; hot-rolled, hot-drawn or extruded, not further worked than clad
- 7228105000Forged
- 7228201010Not further worked than hot-rolled, hot-drawn or extruded
- 7228201091Hot-rolled, hot-drawn or extruded, not further worked than clad
- 7228209100Not further worked than hot-rolled, hot-drawn or extruded; hot-rolled, hot-drawn or extruded, not further worked than clad
- 7228302000Of tool steel
- +25 more UK codes in this heading
7229Wire of other alloy steel
UK commodity codes (5)
- 7229200010With a cross section with a diameter of 0,6mm to 4mm, containing by weight not more than 0,2% of carbon, 0,6% or more but not more than 1,4% of silicon, and 0,9% or more but not more than 1,9% of manganese, but no other element in a proportion that would give the steel the characteristics of another alloy steel, whether coated with copper or bronze or wax/oil based lubricant or not
- 7229902000Of high-speed steel
- 7229905000Containing by weight 0,9 % or more but not more than 1,15 % of carbon, 0,5 % or more but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum
- 7229200090Other
- 7229909000Other