HS chapter
39
Plastics and articles thereof
562 UK codes·319 US codes· 26 headings
013901Polymers of ethylene, in primary forms
UK commodity codes (31)
MFN 0%–6% (29/31)
- 3901101020High flow linear low density polyethylene-1-butene / LLDPE (CAS RN 25087-34-7) in form of powder, with -a melt flow rate (MFR 190 °C/2,16 kg) of 16g/10min or more, but not more than 24 g/10 min and -a density (ASTM D 1505) of 0,922 g/cm³ or more, but not more than 0,926 g/cm³ and -a vicat softening temperature of min. 94 °C
- 3901101050Copolymer of ethylene and 1-butene (CAS RN 25087-34-7) with: -a density (ASTM D 1505) of 0,924 g/cm³ or more but not more than 0,928 g/cm³, -a melt flow rate (190 °C/2,16 kg) of 48 g/10 min or more but not more than 52 g/10 min, and -a peak melting temperature of 120 °C or more but not more than 124 °C
- 3901101060Copolymer of ethylene and 1-butene (CAS RN 25087-34-7) with: -a density (ASTM D 1505) of 0,922 g/cm³ or more but not more than 0,926 g/cm³ and -a melt flow rate (190 °C/2,16 kg) of 18 g/10 min or more but not more than 22 g/10 min
- 3901109030Polyethylene granules, containing by weight 10 % or more but not more than 25 % of copper
- 3901201000Polyethylene in one of the forms mentioned in note 6(b) to this chapter, of a specific gravity of 0,958 or more at 23 °C, containing: - 50 mg/kg or less of aluminium, - 2 mg/kg or less of calcium, - 2 mg/kg or less of chromium, - 2 mg/kg or less of iron, - 2 mg/kg or less of nickel, - 2 mg/kg or less of titanium and - 8 mg/kg or less of vanadium, for the manufacture of chlorosulphonated polyethylene
- 3901300010For cavity filling, for use in certain types of aircraft
- +25 more UK codes in this heading
US HTS codes (12)
MFN 5.3%–6.5% (10/12)
- 3901101000Having a relative viscosity of 1.44 or more
- 3901105010Linear low density polyethylene
- 3901105020Low density polyethylene, except linear low density polyethylene
- 3901105030Medium density polyethylene
- 3901201000Having a relative viscosity of 1.44 or more
- 3901302000Vinyl acetate-vinyl chloride-ethylene terpolymers, containing by weight less than 50 percent derivatives of vinyl acetate, except those polymerized from aromatic or modified aromatic monomers
- +6 more US codes in this heading
023902Polymers of propylene or of other olefins, in primary forms
UK commodity codes (19)
MFN 0%–6% (18/19)
- 3902100020Polypropylene, containing no plasticiser, - of a melting point of more than 150 °C (as determined by the ASTM D 3417 method), - of a heat of fusion of 15 J/g or more but not more than 70 J/g, - of an elongation at break of 1 000 % or more (as determined by the ASTM D 638 method), - of a tensile modulus of 69 MPa or more but not more than 379 MPa (as determined by the ASTM D 638 method)
- 3902200020Hydrogenated polyisobutene, in liquid form
- 3902300010For cavity filling, for use in certain types of aircraft
- 3902300020Hydrogenated block copolymer of styrene and isoprene (CAS RN 68648-89-5), containing by weight less than 37 % of styrene
- 3902300030Hydrogenated copolymer of styrene, isoprene and butadiene, containing by weight 28 % or more, but not more than 55 % of propylene
- 3902300095A-B-A block copolymer, consisting of: - a copolymer of propylene and ethylene and - 21 % (± 3 %) by weight of polystyrene
- +13 more UK codes in this heading
033903Polymers of styrene, in primary forms
UK commodity codes (15)
MFN 0%–6%
- 3903110000Expansible
- 3903190040Crystalline polystyrene with: - a melting point of 268 °C or more but not more than 272 °C - a setting point of 232 °C or more but not more than 247 °C, - whether or not containing additives and filling material
- 3903200000Styrene-acrylonitrile (SAN) copolymers
- 3903300000Acrylonitrile-butadiene-styrene (ABS) copolymers
- 3903901000Copolymer, solely of styrene with allyl alcohol, of an acetyl value of 175 or more
- 3903902000Brominated polystyrene, containing by weight 58 % or more but not more than 71 % of bromine, in one of the forms mentioned in note 6(b) to this chapter
- +9 more UK codes in this heading
043904Polymers of vinyl chloride or of other halogenated olefins, in primary forms
UK commodity codes (28)
MFN 0%–6%
- 3904100015Suspension polyvinylchloride (‘S-PVC’), not mixed with any other substance
- 3904100080Suspension polyvinylchloride (‘S-PVC’), not mixed with any other substance
- 3904210010In the form of granules, for use in certain types of aircraft
- 3904220010In the form of granules, for use in certain types of aircraft
- 3904300000Vinyl chloride-vinyl acetate copolymers
- 3904400010For cavity filling, for use in certain types of aircraft
- +22 more UK codes in this heading
US HTS codes (13)
MFN 5.3%–6.5% (10/13)
- 3904100000Poly(vinyl chloride), not mixed with any other substances
- 3904210000Nonplasticized
- 3904220000Plasticized
- 3904302000Vinyl acetate-vinyl chloride-ethylene terpolymers, containing by weight less than 50 percent derivatives of vinyl acetate, except those polymerized from aromatic or modified aromatic monomers
- 3904400000Other vinyl chloride copolymers
- 3904500000Vinylidene chloride polymers
- +7 more US codes in this heading
053905Polymers of vinyl acetate or of other vinyl esters, in primary forms; other vinyl polymers in primary forms
UK commodity codes (27)
MFN 0%–6% (26/27)
- 3905120000In aqueous dispersion
- 3905190010For cavity filling, for use in certain types of aircraft
- 3905210000In aqueous dispersion
- 3905290010For cavity filling, for use in certain types of aircraft
- 3905300010Viscous preparation, essentially consisting of poly(vinyl alcohol) (CAS RN 9002-89-5), an organic solvent and water for use as protective coating of wafers during the manufacturing of semiconductors
- 3905300091Other than for the manufacturing of dry-blend adhesives, produced and sold in powder form for the carton board industry
- +21 more UK codes in this heading
US HTS codes (9)
MFN 3.2%–5.3% (8/9)
- 3905120000In aqueous dispersion
- 3905210000In aqueous dispersion
- 3905300000Poly(vinyl alcohol), whether or not containing unhydrolyzed acetate groups
- 3905911000Containing by weight 50 percent or more of derivatives of vinyl acetate
- 3905993000Polyvinyl carbazole (including adjuvants)
- 3905190000Other
- +3 more US codes in this heading
063906Acrylic polymers in primary forms
UK commodity codes (17)
MFN 0%–6% (15/17)
- 3906100000Poly(methyl methacrylate)
- 3906901000Poly[N-(3-hydroxyimino-1,1-dimethylbutyl)acrylamide]
- 3906902000Copolymer of 2-diisopropylaminoethyl methacrylate with decyl methacrylate, in the form of a solution in N,N-dimethylacetamide, containing by weight 55 % or more of copolymer
- 3906903000Copolymer of acrylic acid with 2-ethylhexyl acrylate, containing by weight 10 % or more but not more than 11 % of 2-ethylhexyl acrylate
- 3906904000Copolymer of acrylonitrile with methyl acrylate, modified with polybutadiene-acrylonitrile (NBR)
- 3906905000Polymerisation product of acrylic acid with alkyl methacrylate and small quantities of other monomers, for use as a thickener in the manufacture of textile printing pastes
- +11 more UK codes in this heading
US HTS codes (4)
MFN 4.2%–6.3% (3/4)
073907Polyacetals, other polyethers and epoxide resins, in primary forms; polycarbonates, alkyd resins, polyallyl esters and other polyesters, in primary forms
UK commodity codes (59)
MFN 0%–6% (54/59)
- 3907100000Polyacetals
- 3907210000Bis(polyoxyethylene) methylphosphonate
- 3907291110Poly(ethylene oxide) of a number average molecular weight (Mn) of 100 000 or more
- 3907291120Bis[Methoxypoly[ethyleneglycol)]-maleimidopropionamide, chemically modified with lysine, of a number average molecular weight (Mn) of 40 000
- 3907291130Mixture containing by weight: -75 % or more of polyethyleneglycol modified butyl-2-cyano-3-(4-hydroxy-3-methoxyphenyl) acrylate, with an ethylene oxide chain length of not more than 30 (CAS RN 780763-40-8) -not more than 25 % of ethoxylated sorbitan trioleate (CAS RN 9005-70-3)
- 3907291140Ethoxylated glycerol (CAS RN 31694-55-0) with a hydroxyl number of 541 or more but not more than 587 (ASTM 4274)
- +53 more UK codes in this heading
US HTS codes (17)
MFN 5.8%–6.5% (11/17)
083908Polyamides in primary forms
UK commodity codes (3)
MFN 6% (2/3)
093909Amino-resins, phenolic resins and polyurethanes, in primary forms
UK commodity codes (12)
MFN 0%–6% (10/12)
- 3909100000Urea resins; thiourea resins
- 3909200010Polymer mixture, containing by weight: - 60 % or more but not more than 75 % of melamine resin (CAS RN 9003-08-1), - 15 % or more but not more than 25 % of silicon dioxide (CAS RN 14808-60-7 or 60676-86-0), - 5 % or more but not more than 15 % of cellulose (CAS RN 9004-34-6), and - 1 % or more but not more than 15 % of phenolic resin (CAS RN 25917-04-8)
- 3909310000Poly(methylene phenyl isocyanate) (crude MDI, polymeric MDI)
- 3909390010Formaldehyde, oligomeric reaction products with aniline (CAS RN 25214-70-4)
- 3909400000Phenolic resins
- 3909501000Polyurethane of 2,2′-(tert-butylimino)diethanol and 4,4′-methylenedicyclohexyl diisocyanate, in the form of a solution in N,N-dimethylacetamide, containing by weight 50 % or more of polymer
- +6 more UK codes in this heading
US HTS codes (8)
MFN 2.1%–6.5% (7/8)
103910Silicones in primary forms
UK commodity codes (12)
MFN 6%
- 3910000010Liquid poly(methylhydrosiloxane) with terminal trimethylsilyl groups (CAS RN 63148-57-2) with a purity by weight of 99,9 % or more
- 3910000015Dimethyl, methyl(propyl(polypropylene oxide)) siloxane (CAS RN 68957-00-6), trimethylsiloxy-terminated
- 3910000020Block copolymer of poly(methyl-3,3,3-trifluoropropylsiloxane) and poly[methyl(vinyl)siloxane]
- 3910000025Preparations containing by weight: - 10 % or more, 2-hydroxy-3-[3-[1,3,3,3-tetramethyl-1-[(trimethylsilyl)oxy] disiloxanyl] propoxy] propyl-2-methyl-2-propenoate (CAS RN 69861-02-5)and - 10 % or more, α-Butyldimethylsilyl- ω -3-[(2-methyl-1-oxo-2-propen-1-yl)oxy]propyl-terminated silicone polymer (CAS RN 146632-07-7)
- 3910000035Preparations containing by weight: - 30 % or more, α -Butyldimethylsilyl- ω -(3-methacryloxy-2-hydroxypropyloxy)propyldimethylsilyl-polydimethylsiloxane (CAS RN 662148-59-6) and - 10 % or more, N,N - Dimethylacrylamide (CAS RN 2680-03-7)
- 3910000040Silicones of a kind used in the manufacture of long term surgical implants
- +6 more UK codes in this heading
US HTS codes (1)
MFN 3%
113911Petroleum resins, coumarone-indene resins, polyterpenes, polysulphides, polysulphones and other products specified in note 3 to this chapter, not elsewhere specified or included, in primary forms
UK commodity codes (31)
MFN 0% (29/31)
- 3911100010For cavity filling, for use in certain types of aircraft
- 3911100081Non-hydrogenated hydrocarbon resin, obtained by polymerization of more than 75 % by weight C-5 to C-12 cycloaliphatic alkenes and more than 10 % but not more than 25 % by weight aromatic alkenes yielding a hydrocarbon resin with: - an iodine value of more than 120 and - a Gardner Colour of more than 10 for the pure product or - a Gardner Colour of more than 8 for a 50 % solution by weight in toluene (as determined by the ASTM method D6166)
- 3911200000Poly(1,3-phenylene methylphosphonate)
- 3911901110Poly(oxy-1,4-phenylenesulphonyl-1,4-phenyleneoxy-1,4-phenyleneisopropylidene-1,4-phenylene) (CAS RN 25135-51-7 and CAS RN 25154-01-2), in one of the forms mentioned in note 6(b) to this chapter containing by weight not more than 20 % of additives
- 3911901300Poly(thio-1,4-phenylene)
- 3911901915Polyetherimide of - 5,5′-[(isopropylidene)bis(4,1-phenylene)dioxy]bis(1,3-isobenzofurandione) and 1,3-benzenediamine whether or not as a copolymer with 3-aminopropyl terminated dimethylsilicones (CAS RN 61128-46-9 or 99904-16-2), or - 5,5′-[(isopropylidene)bis(4,1-phenylene)dioxy]bis(1,3-isobenzofurandione) and 1,4-benzenediamine (CAS RN 61128-47-0), or - 4,4′-[(isopropylidene)bis(4,1-phenylene)dioxy]bis(1,3-isobenzofurandione), 5,5′-[(isopropylidene)bis(4,1-phenylene)dioxy]bis(1,3-isobenzofurandione), 4,5′-[(isopropylidene)bis(4,1-phenylene)dioxy]bis(1,3-isobenzofurandione), pyromellitic dianhydride, 1,2-benzenediamine, 1,3-benzenediamine and 1,4-benzenediamine with phthalic anhydride endcaps (CAS RN 96557-46-9)
- +25 more UK codes in this heading
US HTS codes (10)
MFN 5.8%–6.5% (6/10)
- 3911100000Petroleum resins, coumarone, indene or coumarone-indene resins; polyterpenes
- 3911200000Poly(1,3-phenylene methylphosphonate)
- 3911901000Elastomeric
- 3911901500Poly(nitrilomethanetetraarylnitrilo- [2,4,6-tris-(1-methyethyl)-1,3- phenylene]]-2,6-bis(1-methylethyl)- phenyl]-ω-[[[2,6-bis(1-methylethyl)- phenyl]amino]methylene]amino carbodiimide or 2,4-diisocyanate-1,3,5-tris(1-methyl- ethyl) homopolymer with polyethylene
- 39119035001,1'-Bis(methylenedi-4,1-phenylene)- 1H-pyrrole-2,5-dione, copolymer with 4,4'-methylenebis(benzeneamine); and Hydrocarbon novolac cyanate ester
- 3911907000Chlorinated synthetic rubber
- +4 more US codes in this heading
123912Cellulose and its chemical derivatives, not elsewhere specified or included, in primary forms
UK commodity codes (19)
MFN 0%–6% (16/19)
US HTS codes (8)
MFN 4.2%–6.4%
133913Natural polymers (for example, alginic acid) and modified natural polymers (for example, hardened proteins, chemical derivatives of natural rubber), not elsewhere specified or included, in primary forms
UK commodity codes (9)
MFN 0% (8/9)
- 3913100020Sodium alginate extracted from brown seaweed, with - a loss on drying of not more than 15 % by weight (4h at 105 °C), - a water-insoluble fraction of not more than 2 % by weight, calculated on the dry weight
- 3913900020Poly(hydroxyalkanoate), predominantly consisting of poly(3-hydroxybutyrate)
- 3913900040Xanthan gum
- 3913900085Sterile sodium hyaluronate (CAS RN 9067-32-7)
- 3913900087With: - a weight average molecular weight (Mw) of not more than 900 000, - an endotoxin level of not more than 0,008 Endotoxin units (EU)/mg, - an ethanol content of not more than 1% by weight, - an isopropanol content of not more than 0,5% by weight
- 3913900095Chondroitinsulphuric acid, sodium salt (CAS RN 9082-07-9)
- +3 more UK codes in this heading
143914Ion-exchangers based on polymers of headings 3901 to 3913, in primary forms
UK commodity codes (2)
MFN varies (non-% / conditional)
US HTS codes (2)
MFN 3.9% (1/2)
153915Waste, parings and scrap, of plastics
UK commodity codes (7)
MFN 0%
- 3915101000Having a specific gravity of less than 0,94 (for example, PE-LD)
- 3915102000Having a specific gravity of 0,94 or more (for example, PE-HD)
- 3915200000Of polymers of styrene
- 3915300000Of polymers of vinyl chloride
- 3915901100Of polymers of propylene
- 3915902000Of polymers of ethylene terephthalate (for example, PET)
- +1 more UK codes in this heading
US HTS codes (5)
MFN varies (non-% / conditional)
163916Monofilament of which any cross-sectional dimension exceeds 1 mm, rods, sticks and profile shapes, whether or not surface-worked but not otherwise worked, of plastics
UK commodity codes (9)
MFN 6%
- 3916100010For use in certain types of aircraft
- 3916200010For use in certain types of aircraft
- 3916901010Rods with cellular structure, containing by weight: - polyamide-6 or poly(epoxy anhydride) - 7 % or more but not more than 9 % of polytetrafluorethylene if present - 10 % or more but not more than 25 % of inorganic fillers
- 3916905010For use in certain types of aircraft
- 3916100090Other
- 3916200099Other
- +3 more UK codes in this heading
US HTS codes (8)
MFN 3.1%–6.5%
173917Tubes, pipes and hoses, and fittings therefor (for example, joints, elbows, flanges), of plastics
UK commodity codes (39)
MFN 4%–6% (31/39)
US HTS codes (23)
MFN 3.1%–6.5% (22/23)
183918Floor coverings of plastics, whether or not self-adhesive, in rolls or in the form of tiles; wall or ceiling coverings of plastics, as defined in note 9 to this chapter
UK commodity codes (6)
MFN 6%
US HTS codes (15)
MFN 4.2%–6.5%
193919Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls
UK commodity codes (40)
MFN 0%–6%
- 3919101200Of poly(vinyl chloride) or of polyethylene
- 3919101500Of polypropylene
- 3919101910Reflecting film, consisting of a layer of polyurethane, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film
- 3919108010For use in certain types of aircraft
- 3919108025Reflecting film, consisting of a layer of polyurethane, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film
- 3919108027Polyester film: - coated on one side with an acrylic thermal release adhesive that debonds at temperatures of 90 °C or more but not more than 200 °C, and a polyester liner, and - on the other side not coated or coated with an acrylic pressure sensitive adhesive or with an acrylic thermal release adhesive that debonds at temperatures of 90 °C or more but not more than 200 °C, and a polyester liner
- +34 more UK codes in this heading
US HTS codes (13)
MFN 5.8%–6.5%
203920Other plates, sheets, film, foil and strip, of plastics, non-cellular and not reinforced, laminated, supported or similarly combined with other materials
UK commodity codes (95)
MFN 0%–6% (92/95)
- 3920102300Polyethylene film, of a thickness of 20 micrometres or more but not exceeding 40 micrometres, for the production of photoresist film used in the manufacture of semiconductors or printed circuits
- 3920102410For use in certain types of aircraft
- 3920102505For use in certain types of aircraft
- 3920102810For use in certain types of aircraft
- 3920104010For use in certain types of aircraft
- 3920108100Synthetic paper pulp, in the form of moist sheets made from unconnected finely branched polyethylene fibrils, whether or not blended with cellulose fibres in a quantity not exceeding 15 %, containing poly(vinyl alcohol) dissolved in water as the moistening agent
- +89 more UK codes in this heading
US HTS codes (33)
MFN 2.9%–6.5% (32/33)
213921Other plates, sheets, film, foil and strip, of plastics
UK commodity codes (33)
MFN 6%
- 3921110010Acrylonitrile butadiene styrene, for use in certain types of aircraft
- 3921120020For use in certain types of aircraft
- 3921131000Flexible
- 3921140020Cellular block of regenerated cellulose, impregnated with water containing magnesium chloride and quaternary ammonium compounds, measuring 100 cm (± 10 cm) × 100 cm (± 10 cm) × 40 cm (± 5 cm)
- 3921190010For use in certain types of aircraft
- 3921190030Blocks with cellular structure, containing by weight: - polyamide-6 or poly(epoxy anhydride) - 7 % or more but not more than 9 % of polytetrafluorethylene if present - 10 % or more but not more than 25 % of inorganic fillers
- +27 more UK codes in this heading
US HTS codes (26)
MFN 4.2%–6.5%
- 3921110000Of polymers of styrene
- 3921121100Over 70 percent by weight of plastics
- 3921121500Other (229)
- 3921121910Products with textile components in which vegetable fibers predominate by weight over any other single textile fiber
- 3921131100Over 70 percent by weight of plastics
- 3921131500Other (229)
- +20 more US codes in this heading
223922Baths, shower-baths, sinks, washbasins, bidets, lavatory pans, seats and covers, flushing cisterns and similar sanitary ware, of plastics
UK commodity codes (3)
MFN 6%
233923Articles for the conveyance or packing of goods, of plastics; stoppers, lids, caps and other closures, of plastics
UK commodity codes (13)
MFN 0%–6%
- 3923101000Boxes, cases, crates and similar articles, of plastic, specially shaped or fitted for the conveyance or packing of semiconductor wafers, masks, or reticles
- 3923109010Photomask or wafer compacts: - consisting of antistatic materials or blended thermoplastics proving special electrostatic discharge (ESD) and outgassing properties, - having non porous, abrasion resistant or impact resistant surface properties, - fitted with a specially designed retainer system that protects the photomask or wafers from surface or cosmetic damage and - with or without a gasket seal, of a kind used in the photolithography or other semiconductor production to house photomasks or wafers
- 3923210000Of polymers of ethylene
- 3923291000Of poly(vinyl chloride)
- 3923301000Of a capacity not exceeding two litres
- 3923309000Of a capacity exceeding two litres
- +7 more UK codes in this heading
US HTS codes (18)
MFN 3%–5.3% (17/18)
- 3923102000Specially shaped or fitted for the conveyance or packing of semiconductor wafers, masks or reticles of subheadings 3923.10 or 8486.90
- 3923210011With no single side exceeding 75 mm in length
- 3923210020Other, with sliders that open or close the seal
- 3923210080With no single side exceeding 75 mm in length
- 3923210085Polyethylene retail carrier bags (PRCBs) with handles (including drawstrings), with no length or width shorter than 6 inches (152.4 mm) or longer than 40 inches (1,016 mm)
- 3923290000Of other plastics
- +12 more US codes in this heading
243924Tableware, kitchenware, other household articles and hygienic or toilet articles, of plastics
UK commodity codes (5)
MFN 6%–6.5%
US HTS codes (10)
MFN 3.1%–6.5%
- 3924101000Salt, pepper, mustard and ketchup dispensers and similar dispensers
- 3924102000Plates, cups, saucers, soup bowls, cereal bowls, sugar bowls, creamers, gravy boats, serving dishes and platters
- 3924103000Trays
- 3924900500Nursing nipples and finger cots
- 3924901010Curtains and drapes
- 3924902000Picture frames
- +4 more US codes in this heading
253925Builders' ware of plastics, not elsewhere specified or included
UK commodity codes (6)
MFN 6%
- 3925100000Reservoirs, tanks, vats and similar containers, of a capacity exceeding 300 litres
- 3925200000Doors, windows and their frames and thresholds for doors
- 3925300000Shutters, blinds (including venetian blinds) and similar articles and parts thereof
- 3925901000Fittings and mountings intended for permanent installation in or on doors, windows, staircases, walls or other parts of buildings
- 3925902000Trunking, ducting and cable trays for electrical circuits
- 3925908000Other
US HTS codes (7)
MFN 3.3%–6.3%
263926Other articles of plastics and articles of other materials of headings 3901 to 3914
UK commodity codes (22)
MFN 0%–6% (21/22)
- 3926100000Office or school supplies
- 3926200000Articles of apparel and clothing accessories (including gloves, mittens and mitts)
- 3926300040Plastic internal door handle used in the manufacture of motor vehicles
- 3926300050Coated interior or exterior decorative parts consisting of: -a copolymer of acrylonitrile-butadiene-styrene (ABS), whether or not mixed with polycarbonate, and -a PVC foil, -not containing layers of copper, nickel or chromium, for use in the manufacturing of parts for motor vehicles of heading 8701 to 8705
- 3926400000Statuettes and other ornamental articles
- 3926905000Perforated buckets and similar articles used to filter water at the entrance to drains
- +16 more UK codes in this heading
US HTS codes (54)
MFN 2.4%–6.5% (47/54)
- 3926100000Office or school supplies
- 3926201010Surgical and medical
- 3926201020Disposable
- 3926202000Baseball and softball gloves and mitts
- 3926204010Disposable
- 3926206000Plastic rainwear, including jackets, coats, ponchos, parkas and slickers, featuring an outer shell of polyvinyl chloride plastic with or without attached hoods, valued not over $10 per unit
- +48 more US codes in this heading